HOW TO CLOSE COMPUTER CASE
|
|
Close the computer case. Check all cable connections, fold cables out of the way so that they do not catch on the computer cover and make sure cables are not routed over the drive cage. Also check that no tools or extra parts are left inside the computer. Now put back the casing cover and secure it with screws.
|
How to put a PC case back together
• Tidy the cables - If the inside of your computer is neat and tidy, you’ll get better airflow and keep it cooler. A neat PC is also easier to work on should you need to install an upgrade later on.
• Keep the cables out of fans - It’s worth double-checking that none of your power cables is in the way of the fans inside your PC. If they are, you run the risk of severing your cables when you turn your PC on for the first time. Pull any loose cables out of the way of fans and secure them with cable ties if necessary. The processor fan is often the worse culprit for snagging cables, so check this one carefully.
How to Close Computer Casing
01 • Before we bring back all the cover of your casing make sure that everthing is properly connected inside of your cpu unit
02 • At the lower back of your computer casing we will reinstall the small black cover to secure the cards inside
03 • Using your screw driver, reinsert the screw and secure the small black cover into place
04 • The small cover protect and secure your cards inside the computer casing
05 • Now We will reinstall the larger cover on both sides of your computer casing
06 • At the left side of your computer casing, reinstall the left large cover of your computer casing
07 • Using your screw driver, reinsert the screw and secure the large black cover into place
08 • At the left side of your computer casing, reinstall the right large cover of your computer casing
09 • Using your hand, reinsert the thumbscrews and secure the large black cover into place
10 • Great! Now were done with CPU unit assembly. We will now start using the CPU unit for a test
Important reminder before you finally close the computer casing
• Check to ensure that all the wires and cables have been properly reconnected - don’t leave any wires dangling!
• Confirm that no tools or parts are left loose inside the case - leaving that screwdriver in the console can short out your computer.
• Reattach the lid or console cover - some cases require you to reattach the cover by screwing several screws into the lid, others just pop back together. it’s a pretty safe bet that whatever steps you took to open your pc’s console case, you can reverse the technique to get it closed again.